Energy Future Days 2026 · B-Solartec AG

Ice storage in practice

How PVT collectors, ice storage and a heat pump work together, and what matters when choosing a heat source.

Energy Future Days networking evening · 5 November 2026 · Kursaal Bern

At the Energy Future Days networking evening in Bern, B-Solartec demonstrated how ice storage and the regeneration of borehole heat exchangers can contribute to heating buildings. Both approaches combine heat collection, storage and use. The solution that suits a building depends on its location, heating and cooling demand and available space. Energy Future Days

How ice storage makes heat usable

An ice store is a tank filled with water. Through heat exchangers, the heat pump extracts heat from the water. When the water starts to freeze, the phase change releases additional heat. The heat pump raises the temperature so that the heat can be used for space heating and hot water.

Rows of vertical plate heat exchangers in the ice store of the Wendelinweg apartment building in Rickenbach SO.
Plate heat exchangers in the ice store of the Wendelinweg apartment building in Rickenbach SO. Photo: TW-FotoArt.

To regenerate the store, heat is supplied to it again, for example from PVT collectors. Depending on the system design, the store can also absorb heat from the building and contribute to passive cooling. This melts the ice. How much heat and cooling are available depends on the sizing and state of the store. Technical foundations of ice storage, OST/SPF

PVT combines electricity and heat

PVT hybrid collectors generate electricity on the same roof area and provide usable heat through an absorber. The electricity can be used in the building or for the heat pump. Depending on the system, the heat can regenerate the ice store or be supplied to the ground through borehole heat exchangers. During planning, collectors, heat source, heat pump, hydraulics and controls are matched to the building’s needs. Integrated energy systems from B-Solartec

HEATCOOLINGELECTRICITYHEATYOUR BUILDING01PVT MODULESElectricity + heat02ICE STORAGE03CONTROL SYSTEMHEAT PUMP
B-Solartec operating diagram with PVT, ice storage, heat pump and controls.

Two projects in practice

Mülimatte in Niederönz · In operation since 2023

The development comprises two apartment buildings with a total of 20 apartments. Its energy system includes an ice store with a volume of 373 m³, 24 plate heat exchangers and 163 PVT hybrid modules. Heat from the collectors regenerates the store. The system is also designed for passive cooling through the underfloor heating. Mülimatte project sheet · Commissioning information

Lirenächer in Kloten · Project status November 2026

In its presentation for the networking evening, B-Solartec introduced the Lirenächer development as an example of large-volume ice storage. For the project, which was under construction at the time, the presentation stated a storage volume of 2’780 m³. The project illustrates the scale a central thermal store can reach in a residential and commercial development.

Source for the Lirenächer project data: B-Solartec AG, presentation «Technologien mit Verantwortung», 5 November 2026, slide 11.

When borehole regeneration is relevant

In a borehole heat exchanger system, the ground serves as the heat source. If more heat is extracted over the long term than flows in or is returned, the ground can cool down. Targeted heat reinjection can support the heat balance. How much regeneration is useful or necessary depends, among other things, on heat extraction, the location and neighbouring systems. Sector coupling in practice · Planning guidance from suissetec

Anyone planning a new build or renovation can discuss with B-Solartec which heat source, storage solution and system sizing suit the building. Discuss a project with B-Solartec